TP-Link JetStream T3700G-28TQ - Show Ip Ospf Area Request-List

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
388
Syntax
show ip ospf process-id area area-id neighbor [ detail | interface-name
interface-number ]
Parameter
process-id —— The process ID, ranging from 1 to 65535.
area-id ——The area ID, in the format of an IP address in dotted decimal
notation or decimal value ranging from 0 to 4294967295.
detail—— The detailed information of the neighbor.
interface-name interface-number—— Specify the interface name and number to
display the detailed neighbor’s information on this interface.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the summary information of the neighbors of Area 0 in process1:
T3700G-28TQ# show ip ospf 1 area 0 neighbor
show ip ospf area request-list
Description
The show ip ospf area request-list command is used to display the LSA
request list of the specified area.
Syntax
show ip ospf process-id area area-id request-list [ interface-name
interface-number | neighbor-id ]
Parameter
process-id —— The process ID, ranging from 1 to 65535.
area-id ——The area ID, in the format of an IP address in dotted decimal
notation or decimal value ranging from 0 to 4294967295.
interface-name interface-number——Specify the interface name and number to
display the LSA request list on this interface.
neighbor-id——Specify neighbor router ID to display the LSA request list on this
neighbor.