T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
151
Example
Download the configuration file named as config_unitid to the corresponding
switches in the stack as their backup configruration file from TFTP server with
the IP 192.168.0.148:
T3700G-28TQ#copy tftp backup-config ip-address 192.168.0.148 filename
config
copy tftp startup-config
Description
The copy tftp startup-config command is used to download the configuration
file from the TFTP server to the switch as the startup configuration file.
Syntax
copy tftp startup-config ip-address ip-addr filename name [ unit-id ]
Parameter
ip-addr —— IP address of the TFTP server.
name —— Specify the name of the configuration file which would be
downloaded. The configuration file with the name name_unitid.cfg will be
downloaded to the switch with corresponding unit ID in the stack.
unit-id —— Specify the unit in the stack to which the configuration file would be
downloaded. If not specified, the corresponding configuration files will be
downloaded to all the members in the stack as their startup configuration file.
Command Mode
Privileged EXEC Mode
Example
Download the configuration file named as config_unitid to the corresponding
switches in the stack as their startup configuration file from TFTP server with the
IP 192.168.0.148:
T3700G-28TQ#copy tftp startup-config ip-address 192.168.0.148 filename
config
To Next Page
Loading...
