T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
160
show environment
Description
The show environment command is used to display system description,
system name, device location, system contact, hardware version, firmware
version, system time, run time and so on.
Syntax
show system-info { all | fan | power | temperature } [ unitid ]
Parameter
all | fan | power | temperature —— Specify the system’s running environmental
status to be displayed. “all” represents all the environmental information; “fan”
represents the fans’ running status; “power” represents the power’s running
status; “temperature” represents the system’s environmental temperature.
unitid —— Specify the unit in the stack whose environmental information will
be displayed. If not specified, the environmental information of all the switches
in the stack will be displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system’s running temperature of all the switches in the stack:
T3700G-28TQ#show environment temperature
show files-in-system
Description
The show files-in-system command is used to display the information of
system files.
Syntax
show file-in-system [ unitid ]
To Next Page
Loading...
