TP-Link JetStream T3700G-28TQ - Show Lacp; Show Lacp Sys-ID

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
71
show lacp
Description
The show lacp command is used to display the LACP information for a
specified EtherChannel Group.
Syntax
show lacp [ channel-group-num ] { internal | neighbor }
Parameter
channel-group-num —— The EtherChannel Group number, ranging from 1 to
32. By default, it is empty, and will display the information of all LACP groups.
internal —— The internal LACP information.
neighbor —— The neighbor LACP information.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the internal LACP information of EtherChannel Group 1:
T3700G-28TQ(config)#show lacp 1 internal
show lacp sys-id
Description
The show lacp sys-id command is used to display the LACP system priority
globally.
Syntax
show lacp sys-id
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the LACP system priority:
T3700G-28TQ(config)#show lacp sys-id