T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
128
T3700G-28TQ(config)#no mac address-table static vid 1
Delete the static address entry whose MAC address is 00:02:58:4f:6c:23:
T3700G-28TQ(config)#no mac address-table static 00:02:58:4f:6c:23
mac address-table aging-time
Description
The mac address-table aging-time command is used to configure aging time
for the dynamic address. To return to the default configuration, please use no
mac address-table aging-time command.
Syntax
mac address-table aging-time aging-time
no mac address-table aging-time
Parameter
aging-time —— The aging time for the dynamic address. The value of it can be
0 or ranges from 10 to 630 seconds. When 0 is entered, the Auto Aging function
is disabled. It is 300 seconds by default.
Command Mode
Global Configuration Mode
Example
Configure the aging time as 500 seconds:
T3700G-28TQ(config)#mac address-table aging-time 500
mac address-table filtering
Description
The mac address-table filtering command is used to add the filtering address
entry. To delete the corresponding entry, please use no mac address-table
filtering command. The filtering address function is to forbid the undesired
package to be forwarded. The filtering address can be added or removed
manually, independent of the aging time.
To Next Page
Loading...
