TP-Link JetStream T3700G-28TQ - show memory-utilization

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
145
T3700G-28TQ#copy running-config startup-config 1
copy running-config backup-config
Description
The copy running-config backup-config command is used to save the current
settings as the backup configuration file.
Syntax
copy running-config backup-config [ unit-id ]
Parameter
unit-id —— Specify the unit in the stack whose current settings would be saved
as the backup configuration file. If not specified, current settings of all the
members in the stack will be saved as their backup configuration file.
Command Mode
Privileged EXEC Mode
Example
Save unit 1’s current settings as the backup configuration file:
T3700G-28TQ#copy running-config backup-config 1
copy running-config user-config
Description
The copy running-config user-config command is used to save the current
settings as the user-defined configuration file.
Syntax
copy running-config user-config [ device ] { configfilename }
Parameter
device —— Specify the unit in the stack whose current settings would be
saved as user-defined configuration file, in the format of unitid:, for example
unit1:. If not specified, current settings of all the members in the stack will be
saved as the user-defined configuration file.
configfilename —— Specify the name of configuration file with the suffix “.cfg”,
ranging from 1 to 63 characters.