TP-Link JetStream T3700G-28TQ - Ethernet Configuration Commands; interface fastEthernet; interface range fastEthernet

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
146
Command Mode
Privileged EXEC Mode
Example
Save unit 1’s current settings as my_config.cfg:
T3700G-28TQ#copy running-config user-config unit1:my_config.cfg
copy backup-config startup-config
Description
The backup-config startup-config command is used to save the backup
configuration file as the startup configuration file.
Syntax
copy backup-config startup-config [ unit-id ]
Parameter
unit-id —— Specify the unit in the stack whose backup configuration file would
be saved as the startup configuration file. If not specified, current backup
configuration files all the members in the stack will be saved as their startup
configuration files.
Command Mode
Privileged EXEC Mode
Example
Save all the members’ backup configuration files as their startup configuration
files in the stack:
T3700G-28TQ#copy backup-config startup-config
copy startup-config backup-config
Description
The copy startup-config running-config command is used to save the startup
configuration file as the backup configuration file.
Syntax
copy startup-config backup-config [ unit-id ]