TP-Link JetStream T3700G-28TQ - snmp-server host

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
222
T3700G-28TQ(config)#show spanning-tree interface gigabitEthernet 1/0/2
mode
show spanning-tree interface-security
Description
The show spanning-tree interface-security command is used to display the
protect information of all ports or a specified port.
Syntax
show spanning-tree interface-security [fastEthernet port | gigabitEthernet
port | ten-gigabitEthernet port] [bpdufilter | bpduguard | loop | root | tc |
tc-defend]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the protect information of all ports:
T3700G-28TQ(config)#show spanning-tree interface-security
Display the protect information of Gigabit Ethernet port 1/0/1:
T3700G-28TQ(config)#show spanning-tree interface-security
gigabitEthernet 1/0/1
Display the interface security bpdufilter information:
T3700G-28TQ(config)# show spanning-tree interface-security bpdufilter
show spanning-tree mst
Description
The show spanning-tree mst command is used to display the related
information of MST Instance.