TP-Link JetStream T3700G-28TQ - copy tftp backup-config

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
131
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of all address entries:
T3700G-28TQ(config)#show mac address-table
show mac address-table aging-time
Description
The show mac address-table aging-time command is used to display the
Aging Time of the MAC address.
Syntax
show mac address-table aging-time
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the Aging Time of the MAC address:
T3700G-28TQ(config)#show mac address-table aging-time
show mac address-table max-mac-count
Description
The show mac address-table max-mac-count interface command is used to
display the security configuration of an Ethernet port or of all Fast/Gigabit
/ten-Gigabit Ethernet ports.
Syntax
show mac address-table max-mac-count { all | interface { fastEthernet port |
gigabitEthernet port | ten-gigabitEthernet port } }
Parameter
all —— Displays the security information of all the Fast/Gigabit/ten-Gigabit
Ethernet ports.
port
—— The Fast/Gigabit/ten-Gigabit Ethernet port number.