T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
161
Parameter
unitid —— Specify the unit in the stack whose system files’ information will be
displayed. If not specified, the system files’ information of all the switches in the
stack will be displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system files’ information of all the switches in the stack:
T3700G-28TQ#show files-in-system
show image-info
Description
The show image-info command is used to display the information of image
files in the system.
Syntax
show file-in-system [ unitid ]
Parameter
unitid —— Specify the unit in the stack whose image files’ information will be
displayed. If not specified, the system image files’ information of all the
switches in the stack will be displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system image files’ information of all the switches in the stack:
T3700G-28TQ#show image-info
To Next Page
Loading...
