TP-Link JetStream T3700G-28TQ - Show Ip Ospf Neighbor

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
382
Syntax
show ip ospf [ process-id ] interface [ brief | interface-name interface-number ]
Parameter
process-id —— The process ID. The information of all the processes will be
displayed if process ID is not specified.
brief—— Display the summary information of the interface.
interface-name interface-number —— Specify the interface name and number
to display the interface’s detailed information.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of the interfaces in all the OSPF processes:
T3700G-28TQ# show ip ospf interface
show ip ospf neighbor
Description
The show ip ospf neighbor command is used to display information of the
OSPF neighbor.
Syntax
show ip ospf [ process-id ] neighbor [ detail | interface-name
interface-number ]
Parameter
process-id —— The process ID, ranging from 1 to 65535. The neighbors’
information of all processes will be displayed if no process ID is specified.
detail—— The detailed information of the neighbor.
interface-name interface-number——Specify the interface name and number to
display the neighbor’s detailed information on this interface.
Command Mode
Privileged EXEC Mode and Any Configuration Mode