T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
138
USA: Second Sunday in March, 02:00 ~ First Sunday in November, 02:00.
Australia: First Sunday in October, 02:00 ~ First Sunday in April, 03:00.
Europe: Last Sunday in March, 01:00 ~ Last Sunday in October, 01:00.
New Zealand: Last Sunday in September, 02:00 ~ First Sunday in April, 03:00.
Command Mode
Global Configuration Mode
Example
Configure the DST period of the switch as Europe:
T3700G-28TQ(config)#system-time dst predefined Europe
system-time dst date
Description
The system-time dst date command is used to specify the DST configuration
in Date mode. This configuration is one-off in use. By default, the current year is
used as the starting time. DST time periods should be within 12 months over
one/two year.
Syntax
system-time dst date {smonth} {sday} {stime} {syear} {emonth} {eday} {etime}
{eyear}[offset]
Parameter
smonth —— Month to start, with the options: Jan, Feb, Mar, Apr, May, Jun, Jul,
Aug, Sep, Oct, Nov, Dec
sday
——
Day to start, ranging from 1 to 31. Please mind that the number of
days depends on the month.
stime —— Time to start, in the format of hh:mm.
syear
——
Year to start, ranging from 2000 to 2099.
emonth —— Month to end, with the options: Jan, Feb, Mar, Apr, May, Jun, Jul,
Aug, Sep, Oct, Nov, Dec
eday —— Day to end, ranging from 1 to 31. Please mind that the number of
days depends on the month.
etime —— Time to end, in the format of hh:mm.
eyear
——
Year to end, ranging from 2000 to 2099.
To Next Page
Loading...
