TP-Link JetStream T3700G-28TQ - DHCP Server; service dhcp; ip dhcp server exclude-address

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
266
Parameter
port —— The Fast/Gigabit/Ten-gigabit Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the neighbor information of Gigabit Ethernet port 1:
T3700G-28TQ#show lldp neighbor-information interface gigabitEthernet
1/0/1
show lldp traffic interface
Description
The show lldp traffic interface command is used to display the LLDP statistic
information between the local device and neighbor device of the corresponding
port. By default, the LLDP statistic information of all the ports will be displayed.
Syntax
show lldp traffic interface [ fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ]
Parameter
port —— The Fast/Gigabit/Ten-Gigabit Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the LLDP statistic information of Gigabit Ethernet port 1/0/1:
T3700G-28TQ#show lldp traffic interface gigabitEthernet 1/0/1