T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
155
Syntax
remove config filename [ device ]{ configfilename }
Parameter
device —— Specify the unit in the stack whose configuration file will be deleted,
in the format of unitid:, for example unit1:. If not specified, the configuration files
of all members in the stack will be deleted.
configfilename —— Specify the name of the configuration file to be deleted,
ranging from 1 to 63 characters with the suffix “.cfg” included.
Command Mode
Privileged EXEC Mode
Example
Delete the configuration file named config1.cfg of all the members in the stack:
T3700G-28TQ# remove config filename config1.cfg
firmware upgrade
Description
The firmware upgrade command is used to upgrade the switch system file via
the TFTP server.
Syntax
firmware upgrade ip-address ip-addr filename name [ unitid ]
Parameter
ip-addr —— IP address of the TFTP server.
name —— Specify the name for the firmware file.
unitid —— Specify the member’s unit in the stack for which the firmware file
would be applied. If not specified, the firmware files of all the switches in the
stack will be upgraded.
Command Mode
Privileged EXEC Mode
Example
Upgrade the switch system file named as firmware.bin of all the switches in the
stack from the TFTP server with the IP address 192.168.0.148:
To Next Page
Loading...
