Print-Quality Troubleshooting 5-23
Incomplete Fusing or Cold Offset
■ Incomplete Fusing: The toner is not completely fused to the paper and easily
rubs off.
■ Cold Offset: Portions of the image are not fully fused and flake or rub off.
Troubleshooting Procedure
Step Check Yes No
1
Is the problem resolved by running
“Remove Print Smears” from the
Troubleshooting <=> Print Quality
Problems Menu on the printer’s front
panel.
Is the problem resolved by changing
the paper type setting on the printer?
Hot offset: One type lighter.
Cold offset / Incomplete fusing: One
type heavier.
Complete Go to Step 2.
2
Replace the Fuser Assembly.
Does the problem recur after the
Fuser is replaced?
Replace the LVPS,
page 8-99.
Complete.
S6200-286
S6200-224
Xerox Phaser 6200DP
Service Prints[Page 2/3]
Media Type: Paper, Letter
To Next Page
Loading...
