Xerox PHASER 6250 Service Manual

6-8 Phaser 6250 Color Laser Printer Service Manual
Service Diagnostics PostScript NVRAM Resets
Resetting the NVRAM restores all printer values stored in the IP controller NVRAM
including network, printer setup, job defaults, color, margin, and calibrations to their
factory default values. The print counts and the Adobe firmware serial number are not
affected by this reset.
1. Enter Service Diagnostics.
2. Highlight NVRAM Access and press OK.
3. Highlight PostScript NVRAM Reset and press OK.
4. Resetting NVRAM! Are you sure? is displayed. Highlight Yes and press OK.
The printer now exits Service Diagnostics and reboots. While booting, NVRAM is
reset.

Xerox PHASER 6250 Specifications

General

Brand	Xerox
Model	PHASER 6250
Category	Printer
Language	English