Service Parts Disassembly 8-19
Turn Chute Assembly (PL3.1.2)
1. Pull the paper tray out of the printer.
2. Push in on the Turn Chute Assembly (item #1) to releae the 2 tabs.
3. Rotate the Turn Chute Assembly 90 degrees downward from the Paper Feeder.
4. Release the tabs securing the right and left shaft of the Turn Chute Assembly to
the Paper Feeder.
5. Pull out the Turn Chute Assembly from the Paper Feeder to remove.
1
6250-139
6250-140
1
To Next Page
Loading...
Need help?
General