Service Parts Disassembly 8-97
Earth Ground Circuit Board (PL 11.1.16)
1. Remove the Fuser Assembly.
2. Remove the Transfer Roll Assembly.
3. Remove the Chute Assembly Registration (page 8-71).
4. Remove the Housing Assembly Retard (page 8-37).
Note
Loosen the screw securing the grounding strap at the left side of the board to
allow removal of the board without bending the grounding strap.
5. Remove the 2 screws securing the Ground Circuit Board (item #1) and remove
the board.
6250-238
1
To Next Page
Loading...
