Xerox PHASER 6250 - Page 401

Parts List 9-29
Note
** When a new EEPROM Board is installed in the printer, the CRUM data
written to the EEPROM makes it unique to that printer. The EEPROM board
cannot be re-used in another printer.
PL 10.1 Toner Cartridge Holder Unit Assemblies - Service Parts List
ID No. Part Number Qty Name/Description
1. 116-1599-00* 1 Holder, Toner Cartridge Assembly, Yellow
2. 116-1600-00* 1 Holder, Toner Cartridge Assembly, Magenta
3. 116-1601-00* 1 Holder, Toner Cartridge Assembly, Cyan
4. 116-1602-00* 1 Holder, Toner Cartridge Assembly, Black
5. 116-1603-00* 1 Sensor, No Toner
6. 116-1604-00* 1 Switch Bracket, Toner CTG-IN
7. 106R00670*
106R00674*
1
1
Yellow Toner Cartridge, Standard-Capacity
Yellow Toner Cartridge, High-Capacity
8. 106R00669*
106R00673*
1
1
Magenta Toner Cartridge, Standard-Capacity
Magenta Toner Cartridge, High-Capacity
9. 106R00668*
106R00672*
1
1
Cyan Toner Cartridge, Standard-Capacity
Cyan Toner Cartridge, High-Capacity
10. 106R00671*
106R00675*
1
1
Black Toner Cartridge, Standard-Capacity
Black Toner Cartridge, High-Capacity
11. 116-1606-00* 1 Harness Assy, TNR4 (J51-J511/J432/J512/J513/J514/
J701/J703/J704/J342)
12. 116-1467-00 1 Assembly , Harness CRUM (J71-J710)
13. 116-1633-00* 1 Assembly, Plate Dispenser
14. 116-1468-00 1 **Circuit Board, EEPROM
15. 116-1469-00 1 Sub-High-Voltage Power Supply
16. 1 HSG Base, CRUM (NS, part of item 21)
17. 1 HSG Assy, Coil Reader (NS, part of item 21)
18. 1 Circuit Board, CRUM Reader (NS, part of item 21)
19. 1 Harness Assy, RF1D2 (J341~J3411)(NS, part of item 21)
20. 1 Cover, CRUM Holder (NS, part of item 21)
21. 116-1607-00* 1 Box Assy, CRUM Reader (with 16 ~ 20)
22. 116-1605-00* 1 Actuator, Toner CTG-IN
23. 116-1630-00 1 Kit, Rack V (Gear, Rack)