1-6
FEATURES
After resetting the average fuel consumption dis-
play, “– –.–” will be shown until the vehicle has
traveled 1 km (0.6 mi).
ECA25730
If there is a malfunction, “– –.–” will be con-
tinuously displayed. Check the vehicle.
Instantaneous fuel consumption
The instantaneous fuel consumption mode
“CRNT.F” can be set to “km/L” or “L/100km”.
If traveling at speeds under 10 km/h (6mi/h), “– –
.–” will be displayed.
ECA25730
If there is a malfunction, “– –.–” will be con-
tinuously displayed. Check the vehicle.
Setting mode
Stop the vehicle and then push the “MENU”
switch for 1 second to enter the setting mode. To
exit the setting mode and return to the standard
display mode, push the “MENU” switch again for
1 second or select “ ”.
When the engine trouble warning light or a sys-
tem indicator light is on, the setting mode may be
restricted.
Menu items
Grip warmer settings
1. Use the select switch to highlight “Grip
Warmer”.
1. Setting mode display
Display Description
Grip Warmer
This function allows you to
set the low, middle, and high
settings to 10 temperature
levels.
Seat Heater
This function allows you to
set the low, middle, and high
settings to 10 temperature
levels.
Traction Con-
trol
This function allows you to
turn the traction control sys-
tem on or off.
Maintenance
This function allows you to
check and reset the oil
change interval (indicator),
V-Belt change interval (indi-
cator), and the “Free” main-
tenance interval.
Unit
This function allows you to
switch the fuel consumption
units between “L/100km” and
“km/L”.
Display
This function allows you to
change the items shown in 3
information displays.
Brightness
This function allows you to
adjust the brightness of the
instrument panel.
Clock
This function allows you to
set the clock.
All Reset
This function allows you to
reset all items to their factory
preset or default settings; ex-
cepting the odometer, clock,
and maintenance counter
items “Oil” and “V-Belt”.
To Next Page
Loading...
Need help?
General
