1-8
FEATURES
2. Push the “MENU” switch. The traction control
system setting display will be shown.
3. To set the traction control system to “OFF”,
push the select switch “ ” side for 2 sec-
onds.
4. To set the traction control system to “ON”
again, push the select switch “ ”.
When the vehicle is powered on, the traction
control system is automatically set to “ON”.
5. When you finished changing the settings,
push the “MENU” switch to return to the
menu screen.
Resetting the maintenance counters
1. Use the select switch to highlight “Mainte-
nance”.
2. Push the “MENU” switch, and then use the
select switch to select the item to reset.
3. Push the “MENU” switch, and after the se-
lected item is highlighted, push the select
switch“ ” for one second.
4. When you finished resetting, use the select
switch to highlight “ ”, and then push the
“MENU” switch to return to the menu screen.
Selecting the units
1. Use the select switch to highlight “Unit”.
To Next Page
Loading...
Need help?
General
