YASKAWA V1000 Series Installation & Start-Up Manual

C.1 MEMOBUS/Modbus Basic Set-Up
434 YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
MEMOBUS/Modbus communication can perform the following operations
regardless of the settings in b1-01 and b1-02:
• Monitor the operation status of the drive
• Set and read drive parameters
• Reset faults
• Input multi-function digital input commands
• Control multi-function digital and analog outputs.
Note: An OR operation is performed between the multi-function command input from the
master device and the command input from multi-function digital input terminals S3
to S8.

YASKAWA V1000 Series Specifications

General

Model	V1000 Series
Series	V1000
Output Frequency	0.1 to 400 Hz
Overload Capacity	150% for 60 seconds
Type	AC Drive
Control Method	V/f Control
Input Voltage	200-240V, 380-480V
Output Voltage	0 to Input Voltage
Power Range	0.1 to 18.5 kW
Horsepower	0.2 to 25 HP
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Ground Fault
Communication Interfaces	Modbus RTU
Enclosure	IP20
Ambient Temperature	-10 to +50°C
Storage Temperature	-20 to +60°C
Humidity	5 to 95% RH (non-condensing)
Cooling Method	Fan Cooled