<6. Parameter Lists>
212
IM 01E21A02-03EN
Relative
Index
Index
Parameter
Name
Default Value
Write
Mode
Description
AI1 AI2 AI3
AI4
(only
AXG)
23 4023 4123 4223 4323 ACK_OPTION 0xFFFF AUTO
Sets operation to acknowledge
(acknowledgmentforthe
alarm)ofvariousalarms.
By setting a bit to the alarm,
the device operates for the
alarm as if it is acknowledged
without the acknowledgment.
Bit assignment complies with
the Communication standard
speciîš¿cations.
24 4024 4124 4224 4324 ALARM_HYS 0.5 AUTO
Threshold(hysteresis)against
clearing each alarm of HI_HI,
HI, LO and LO_LO. An active
alarm is cleared if the setpoint
goes into the normal value side
by the amount of hysteresis
from the limit value.
25 4025 4125 4225 4325 HI_HI_PRI 0 AUTO
Speciesthepriorityforthe
HI_HI alarm. It can be used
not just to set the priority, but
todisablealarmnotication.
Meanwhile, to activate an
alarm on communication, it is
necessary to specify the priority
for alarm activation in advance.
To activate an alarm, set 3 or
more. By sending with priority
information being added in a
communication frame when the
alarm is activated, for example,
the alarm is used to apply a
ltertoignorevaluesbelowthe
speciedpriorityonthehost
side.
26 4026 4126 4226 4326 HI_HI_LIM FLT_MAX AUTO
Speciesalimitvalueforthe
HI_HI alarm.
27 4027 4127 4227 4327 HI_PRI 0 AUTO
SpeciesthepriorityoftheHI
alarm. Meanwhile, to activate
an alarm on communication,
it is necessary to specify the
priority for alarm activation in
advance. To activate an alarm,
set 3 or more. By sending with
priority information being added
in a communication frame
when the alarm is activated, for
example, the alarm is used to
applyaltertoignorevalues
belowthespeciedpriorityon
the host side.
28 4028 4128 4228 4328 HI_LIM FLT_MAX AUTO
SpeciesalimitvaluefortheHI
alarm.
To Next Page
Loading...
Need help?
General
