1-2 Introduction and Overview
What’s in the Agilent 5DX Service Guide? 5DX Series 3
What’s in the Agilent 5DX Service Guide?
The Agilent 5DX Series 3 Service Guide provides information about servicing
the Agilent 5DX System. This chapter gives an overview of the service guide, an
introduction to the Agilent 5DX Series 3 System and an overview of the 5DX
components.
The warranty and regulatory pages provide information about the Agilent 5DX
System’s compliance with various government regulations. The 5DX System is
designed, manufactured and registered in accordance with strict criteria
established by the Center for Devices and Radiological Health (CDRH),
Department of Health and Human Services, X-ray Products Branch. Agilent
Technologies certifies that the 5DX System meets or exceeds U.S Federal
Requirements, 21 CFR 1020.40, subchapter J, for cabinet X-ray systems used in an
industrial environment.
The section or chapter titled Safety Summary describes necessary precautions
that should be taken by personnel that work in close proximity to the 5DX System
as well as the safety features of the 5DX.
Detailed descriptions and diagrams for each subsystem are provided in the
following sections of this manual, including:
• Safety Interlock Subsystem
• Power Subsystem
• Panel Handling Subsystem
• Pneumatic Subsystems
• Surface Map Subsystem
• Imaging Subsystem
• System Controller
• Imaging Diagnostics
To keep the 5DX System in optimum working condition, Agilent recommends
following the Preventive Maintenance schedules and procedures given in the
chapter titled Maintenance.
To Next Page
Loading...
Need help?
General
