Agilent 5DX Service Guide vii
5DX Series 3 Safety Information
Safety Information
SAFETY SYMBOLS
WA R N I NG
This product produces X-rays. Do not attempt to open any part of the product.
Exposure to X-rays can cause serious bodily injury. Refer all servicing to
service-trained personnel.
WA R N I NG
This product produces X-rays. Do not operate this product or turn on the X-rays
source unless all shielding is in place. Operation without shielding in place can
result in serious bodily injury.
Instruction symbol affixed to
product. Indicates that the user must
refer to the manual for specific
WARNING or CAUTION
information to avoid personal injury
or damage to the product.
Indicates hazardous voltage.
Calls attention to pinch hazards.
Keep hands away to avoid injury.
Indicates this equipment produces
laser radiation when energized.
Indicates this equipment produces X-
rays when energized.
WARNING
Calls attention to a procedure,
practice, or condition that could
result in bodily injury or death.
Caution
Calls attention to a procedure,
practice, or condition that could
cause damage to equipment or
permanent loss of data.
Frame or chassis ground terminal —
typically connects to the equipment’s
metal frame.
Alternating current (ac).
Indicates the field wiring terminal
that must be connected to earth
ground before operating the
equipment — protects against
electrical shock in case of fault.
Direct current (dc).
!
To Next Page
Loading...
Need help?
General
