Agilent 5DX Service Guide ix
5DX Series 3 Safety Information
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Agilent Technologies, Inc.
Manufacturing Test Division
Manufacturer’s Address: 815 14th Street S.W.
Loveland, Colorado 80537
declares, that the products: Agilent Model 5DX Systems
and to which this declaration relates, are in conformity with the protection requirements of:
The EMC Directive 89/336/EEC (inclusive 93/68/EEC) and carries the “CE” marking accordingly.
Attestation is provided according to article 10 (2) of the Directive by a Technical Construction File.
Technical File Number: 95-0900-003-TCF Rev: A Dated: 31 March, 1995
The following standards are referenced in the file:
EMC: CISPR 11:1990/EN55011 (1991)
IEC 801-2:1991/EN50082-1 (1992)
IEC 801-3:1984/EN50082-1 (1992)
IEC 801-4:1988/EN50082-1 (1992)
A Technical Report/Certificate has been issued in accordance with Part V (Reg 50) of the UK
Regulations (SI 1992 No. 2372) by a UK appointed Competent Body, namely,
Interference Technology International Limited
41-42 Shrivenham Hundred Business Park
Shrivenham, Swindon, Wilts. SN6 8TZ
England, UK
Certificate Number: C134FPI1.JES Dated: 1 April, 1996
Supplementary Information:
This product also herewith complies with the requirements of the Low Voltage Directive 73/23/EEC
(inclusive 93/68/EEC).
Safety: IEC 1010-1 (1990) Incl. Amend 1 (1992)/EN61010-1 (1993)
CSA C22.2 #1010.1 (1992)
UL 3111
April 1, 1996 Loveland Quality Manager
European Contact: Your local Agilent Technologies Sales and Service Office or Agilent Technologies GmbH,
Department HQ-TRE, Herrenberger Straße 130, D-71034 Böblingen (FAX: +49-7031-143143).
To Next Page
Loading...
Need help?
General
