GPIB Operation ML24xxA Native Commands
ML2437A/38A OM/PM PN: 10585-00001 Rev. P 8-41
GRDATA (Display Graph Cursor Data)
GRDDT (Power vs. Time data display time)
Syntax: GRDATA <state>
state: ON or OFF
Remarks: Display the graph cursor data readout box. GRDATA must be turned on
before attempting to execute the GRDRQ command to send the data
over the GPIB. If GRDATA is not on, GRDRQ will produce an execution
error in the event status register (ESR).
Related
commands:
GRDRQ
Query: GRDATA?
Returned String: GRDATA <state>
Syntax: GRDDT <time>,<units>
time: 1 minute to 24 hours (1440 minutes)
units: MIN (minutes), HR (hours)
Remarks: Sets the time period of the x axis in minutes or hours. For example,
either of the following statements may be used to set the time period to
2.5 hours:
GRDDT 2.5,HR
GRDDT 150,MIN
Query: GRDDT?
Returned String: GRDDT <time>,<units>
To Next Page
Loading...
