Anritsu ML2437A - GT0 (Set to Ignore the Group Execute Trigger (GET) Command); GT1 (Set GET Command to TR1 Type (Immediate) Trigger); GT2 (Set GET Command to TR2 Type (Settling Delay) Trigger); GTARM (Set Profile Trigger Arming)

ML24xxA Native Commands GPIB Operation
8-46 PN: 10585-00001 Rev. P ML2437A/38A OM/PM
GT0 (Set to ignore the Group Execute Trigger (GET) command)
GT1 (Set 'GET' command to TR1 type (immediate) trigger)
GT2 (Set 'GET' command to TR2 type (settling delay) trigger)
GTARM (Set profile trigger arming)
Syntax: GT0
Remarks: The ML243xA will ignore the GET command or a *TRG.
Related
commands:
*TRG, Group Execute Trigger (GET), GT1, GT2
Syntax: GT1
Remarks: When the ML243xA receives a GET or *TRG command, the system will
perform a TR1-type trigger command.
Related
commands:
*TRG, Group Execute Trigger (GET), GT0, GT2
Syntax: GT2
Remarks: When the ML243xA receives a GET or *TRG command, the system will
perform a TR2-type trigger command.
Related
commands:
*TRG, Group Execute Trigger (GET), GT0, GT1
Syntax: GTARM <state>
state: ON or OFF
Remarks: Sets the profile trigger arming ON or OFF. If set to ON, the system first
checks to see if the BNC sweep blanking input is TRUE before it starts
to trigger. If set to OFF, the system triggers on whatever trigger source
it has been set up for.
Related
commands:
GTARM?
Returned String: GTARM <state>
Query: