Anritsu ML2437A - GRSWP (Graph Averaging Number for Profile or Source Sweep); GRSWR (Reset Graph Averaging for Profile or Source Sweep); GRSWS (Graph Average State for Profile or Source Sweep)

ML24xxA Native Commands GPIB Operation
8-44 PN: 10585-00001 Rev. P ML2437A/38A OM/PM
GRSWP (Graph Averaging Number for Profile or Source Sweep)
GRSWR (Reset Graph Averaging for Profile or Source Sweep)
GRSWS (Graph Average State for Profile or Source Sweep)
Syntax: GRSWP <s>,<val>
s: A or B
val: 1 to 512
Remarks: If GRSWS is set to ON, the points on the graph represent the averaged
value of that point against its averaged value since either the graph
averaging was reset, or since it was turned on.
Related
commands:
GRSWR, GRSWS
Query: GRSWP? <s>
Returned String: GRSWP <s>,<val>
Syntax: GRSWR
Remarks: If the Graph averaging mode in ON, this command resets the data
points and restarts the averaging.
Related
commands:
GRSWP, GRSWS
Syntax: GRSWS <state>
state: ON or OFF
Remarks: Turns Graph Averaging on or off.
Related
commands:
GRSWP, GRSWR
Query: GRSWS?
Returned String: GRSWS <state>