GPIB Operation ML24xxA Native Commands
ML2437A/38A OM/PM PN: 10585-00001 Rev. P 8-45
GRTMM (Profile Min/Max tracking mode)
GRYB (Set graph Y-axis bottom scale)
GRYT (Set graph Y-axis top scale)
Syntax: GRTMM <mode>
mode: SINGLE, INFINITE
Remarks: Set Minimum and maximum tracking mode between the cursors.
SINGLE: Resets min and max values after each sweep.
INFINITE: Never resets the min and max values. The min & max
values are updated after each sweep.
Note: The INFINITE tracking mode can be reset using the MMRST
command.
Related
commands:
MMRST
Query: GRTMM?
Returned String: GRTMM <mode>
Syntax: GRYB <val>
val: -150.0 to +250.0
Remarks: It is not necessary to specify units as the displayed units are always
assumed. Profile and Source Sweep modes always use dBm, but Power
vs. Time mode can also use dBmV or dBmV.
Query: GRYB?
Returned String: GRYB <val>
Syntax: GRYT <val>
val: –150.0 to +250.0
Remarks: It is not necessary to specify units as the displayed units are always
assumed. Profile and Source Sweep modes always use dBm, but Power
vs. Time mode can also use dBmV or dBmV.
Query: GRYT?
Returned String: GRYT <val>
To Next Page
Loading...
