ML4803A Emulation Commands GPIB Operation
8-96 PN: 10585-00001 Rev. P ML2437A/38A OM/PM
ZAJ (Zero the sensor)
Syntax: ZAJ
Remarks: During the zero operation, the zero bit in the status byte is set. When
the zero operation is completed, the zero bit in the status byte is cleared.
When emulating the ML4803, the ML2430 may take longer to zero a
sensor than the ML4803 itself. When performing a zero, the status byte
should be used to identify when zeroing is complete.
To Next Page
Loading...
