GPIB Operation ML4803A Emulation Commands
ML2437A/38A OM/PM PN: 10585-00001 Rev. P 8-89
MCC (Clears the cal factor value at the specified memory location)
MCO (Clears the offset value at the specified memory location)
MCQ (Clears the frequency value at the specified memory location)
MCR (Clears the reference value at the specified memory location)
MCT (Clears all the entries at the specified memory location)
MDI (Disable memory store setting and use)
MEN (Enable setting of the memory stores)
Also will apply the last memory store configured)
Syntax: MCC<mem>
mem: Memory location 1 to 30.
Remarks: Clears the cal factor value at memory store <mem> to 0.0 dBm.
Syntax: MCO<mem>
mem: Memory location 1 to 30.
Remarks: Clears the offset value at memory store <mem> to 0.0 dBm.
Syntax: MCQ<mem>
mem: Memory location 1 to 30.
Remarks: Clears the frequency value at memory store <mem> to 0.1 MHz.
Syntax: MCR<mem>
mem: Memory location 1 to 30.
Remarks: Clears the reference value at memory store <mem> to 0.0 dBm.
Syntax: MCT<mem>
mem: Memory location 1 to 30.
Remarks: Clears frequency, cal factor, offset and reference values at memory store
<mem>.
Syntax: MDI
Syntax: MEN
To Next Page
Loading...
