Anritsu ML2437A - MNMXS (Track Min and Max Values); MODDEL (Modem Redial Delay Time); MODINIT (Initialize Modem); MODLIM (Autodial Enable for Limits Failure)

ML24xxA Native Commands GPIB Operation
8-54 PN: 10585-00001 Rev. P ML2437A/38A OM/PM
MNMXS (Track min and max values)
MODDEL (Modem redial delay time)
MODINIT (Initialize modem)
MODLIM (Autodial enable for limits failure)
Syntax: MNMXS <c>,<state>
c: 1 or 2
state: ON or OFF
Remarks: Turns ON or OFF the min/max tracking for the specified channel. The
MMRST command resets the values.
Related
commands:
MMRST
Query: MNMXS? <c>
Returned String: MNMXS <c>,<state>
Syntax: MODDEL <value>
value: 1 to 10
Remarks: Sets the autodial delay between retrys. The value is the number of
minutes to delay between each autodial retry after a failure to connect.
This interval can be set from 1 to 10 minutes. See Section 5-10 for more
information on modem operation.
Query: MODDEL?
Returned String: MODDEL <value>
Syntax: MODINIT
Remarks: Initializes the modem connected to the ML243xA serial port. See Section
5-10 for more information on modem operation.
Syntax: MODLIM <state>
value: TRUE or FALSE
Remarks: When set to TRUE, produces an SRQ and autodials the phone number
(set with MODPH) when a channel limits failure occurs. See Section
5-10 for more information on modem operation.
Query: MODLIM?
Returned String: MODLIM <true> or <false>