Anritsu ML2437A - Sensor Functional Group Commands

ML24XXA Quick Reference
ML2437A/38A OM/PM PN: 10585-00001 Rev. P C-5
Sensor Functional Group Commands
Table C-10. Sensor Functional Group Commands
Command Function
AVG(?) Sets the averaging type for the sensor
AVGLL(?) Auto low level averaging
AVGM Manual Averaging
CFADJ(?) Cal Adjust
CFCAL(?) Cal factor manual setting
CFFRQ(?) Cal Factor Frequency value
CFSRC(?) Cal Factor Source
CFUADD Add an entry pair to a cal factor table
CFUCT Clear cal factor table
CFUID(?) Cal factor table identity
CFULD Cal factor table binary load
CFUPT Preset cal factor table
CFURD Cal factor table binary read
CFUSAV Cal factor table save
CFUSEL Cal factor table select
CFUTBL Cal factor tables
CFUUSE Cal factor tables used
CFUVLD Valid table check
CFVAL Current cal factor value
CVSPF(?) VGHz cal factor stop frequency
CVSPV(?) VGHz cal factor stop voltage
CVSTF(?) VGHz cal factor start frequency
CVSTV(?) VGHz cal factor start voltage
DUTY(?) Duty cycle
DUTYS(?) Duty cycle state
OFFCLR Clear an offset table
OFFFIX(?) Offset fixed value
OFFTBL(?) Select an offset table
OFFTBR Output an offset table
OFFTBU Update an offset table
OFFTYP(?) Offset type to use
OFFVAL Sensor Offset Value
RGH(?) Range Hold Sensor
SENMM(?) Sensor Measurement mode