Anritsu ML2437A - MFG (Set the Frequency Value at the Specified Location in Ghz); MFM (Set the Frequency Value at the Specified Location in Mhz); MOF (Set the Offset Value at the Specified Location in Dbm); MRF (Set the Reference Value at the Specified Location in Dbm)

ML4803A Emulation Commands GPIB Operation
8-90 PN: 10585-00001 Rev. P ML2437A/38A OM/PM
MFG (Set the frequency value at the specified location in GHz)
MFM (Set the frequency value at the specified location in MHz)
MOF (Set the offset value at the specified location in dBm)
MRF (Set the reference value at the specified location in dBm)
Syntax: MFG<mem><;><value>
mem: Memory location 1 to 30.
value: Frequency value in GHz.
Remarks: Set the frequency value at memory store address <mem> to <value>
GHz.
Syntax: MFM<mem><;><value>
mem: Memory location 1 to 30
value: Frequency value in MHz
Remarks: Set the frequency value at memory store address <mem> to <value>
MHz.
Syntax: MOF<mem><;><value>
mem: Memory location 1 to 30.
value: Offset value in dBm.
Remarks: Set the offset value at memory store address <mem> to <value> dBm
Syntax: MRF<mem><;><value>
mem: Memory location 1 to 30.
value: Reference value in dBm.
Remarks: Set the reference value at memory store address <mem> to <value>
dBm.