Anritsu ML2437A - Appendix A-Technical Support; Appendix B-Specifications; Appendix C-Gpib Quick Reference; Data Output Functional Group Commands

ML24XXA Quick Reference
C-2 PN: 10585-00001 Rev. P ML2437A/38A OM/PM
Data Output Functional Group Commands
CHUNIT(?) Set Channel units
FHOLD(?) Fail indicators Hold
HLIM(?) Set High limits
HLIMS(?) Turn on/off High limits
HOLD(?) Graph hold
LLIM(?) Set Low limits
LLIMS(?) Turn on/off Low limits
MMRST Minimum and maximum Tracking reset
MNMXS(?) Track minimum and maximum values
REL(?) Relative control
Table C-4. Output Functional Group Commands
Command Function
ERRLST Returns the DDE error list
GMNMX Return Graph minimum and maximum values
GRDRQ Return Graph Data readout
MNGDB Output Min Graph Binary Data
MNGD Output Min Graph Data
MXGDB Output Max Graph Binary Data
MXGD Output Max Graph Data
O Return display channel reading
OGBD Output Graph binary data
OGD Output Graph data
ON Output number of channel readings
STATUS Replies with the power meter’s current state
code
STERR Returns the results of the POST or *TST?
command
SYSLD Sets the store number for the saved setup
SYSRD Output the saved setup over the GPIB
Table C-3. Channel Functional Group Commands
Command Function