To Next Page

To Previous Page

5. Troubleshooting

Image 5-19

Code 7605: “Red DMD temp short” (Error)

Situation Solution

Damaged wire unit of the

temperature sensor (reference

19 image 5-19 and image 5-18)

which m easures the temperature of

the DM D of the RED channel.

Repair or replace the wire unit.

Defect temperature sensor

(reference 19 image 5-19) which

measures the temperature of the

DMD of the RED channel.

Replace the temperature sensor on the cooling block of the RED channel.

Code 7606: “Green DMD temp low” (Error)

This error code is probably preceded by the warning code 7607: “Green DMD tem p low”. The sa me troubleshooting table can be

applied to.

Code 7607: “Green DMD temp low” (Warning)

Situation Solution

The elec tronics of the L ight

Processor Unit remains off due to a

low DMD temperature.

Make sure that the ambient tem perature is within specs: higher then 10°C (50°F). Let

the projector acclim ate. Do not ignite the lamp, otherwise there is a risk for condensate.

Defect temperature sensor

(reference 18 image 5-20) which

measures the temperature of the

DMD of the GREEN channel.

Replace the temperature s ensor on the cooling block of the GREEN channel.

Image 5-20

56 R5905312 HDF W SERIES 24/01/2013

Barco HDF W series Service Manual

Other manuals for Barco HDF W series