Branson 2000X - Page 137

2000X energy Power Supply Chapter 6: Operation
Instruction Manual Setting Other Weld Parameters
011-003-991 EN 6-45
If you chose Off, continue setting
other parameters in the menu.
If you chose On, use the Select keys
to set the Ground Detect to On or
Off.
Press the Go Back/Esc key to exit
the submenu.
WELD SETUP Pg10of13
Frequency Offset>On
Cycle Aborts> Off
Control Limits> Off
Select
Select
Select
CYCLE ABORTS Pg1of1
Gnd Det Abort = On
Select
Select
Select
Go
Back/
Esc