Branson 2000X - Page 304

Appendix E: Alarm Index
E - 2 011-003-991 EN
+R Pk Power Limit 7 - 22
+R Time Limit 7 - 22
+R Trg > +R Abs 7 - 47
+R Trg >+R Abs 7 - 49
+R Trg Dist Limit 7 - 22
+R Weld Force Limit 7 - 22, 7 - 23
+Reject Absolute Distance Limit 7 - 22
+Reject Energy Limit 7 - 22
+Reject Peak Power Limit 7 - 22
+Reject Time Limit 7 - 22
+Reject Trigger Distance Limit 7 - 22
+Reject Weld Force Limit 7 - 22, 7 - 23
+S Abs Dist Limit 7 - 23, 7 - 24
+S Col Dist Limit 7 - 23
+S Energy Limit 7 - 23, 7 - 25
+S Pk Power Limit 7 - 23, 7 - 25
+S Time Limit 7 - 24
+S Trg > - S Abs 7 - 49
+S Trg > +S Abs 7 - 48, 7 - 49
+S Trg Dist Limit 7 - 24
+S Weld Force Limit 7 - 23
+Suspect Absolute Distance Limit 7 - 23
+Suspect Collapse Distance Limit 7 - 23
+Suspect Energy Limit 7 - 23
+Suspect Peak Power Limit 7 - 23
+Suspect Time Limit 7 - 24
+Suspect Trigger Distance Limit 7 - 24
+Suspect Weld Force Limit 7 - 23
A
Abs Before Trg 7 - 20
ABS Cutoff 7 - 15
Abs Cutoff Conflict 7 - 39, 7 - 40
Abs S/R Limit Cross 7 - 41
Absolute Cutoff 7 - 51
Absolute Distance Before Trigger 7 - 20
Absolute Distance Cutoff 7 - 15, 7 - 51
Act Clr Not Reached 7 - 52
Act Recal Suggested 7 - 52
Actuator Clear Distance Not Reached 7 - 52
Actuator Clear Function (Failure) 7 - 17
Actuator NovRam (failed)
Error Code = 10 7 - 17
Error Code = 20 7 - 17
Error Code = 30 7 - 17
Error Code = 40 7 - 17
Error Code = 50 7 - 17
Error Code = 60 7 - 17
Actuator Type 7 - 17
Afterburst Overload 7 - 50
Amp Step Before Trg (Trigger) 7 - 20
Amp Step Conflict 7 - 27, 7 - 28, 7 - 29, 7 - 41
C
Col S/R Limit Cross 7 - 42
Collapse Cutoff 7 - 52
Collapse Distance for Amplitude Step not Reached
7 - 16
Cutoff Conflict 7 - 29, 7 - 42, 7 - 43
E
Energy Comp Conflict 7 - 29, 7 - 30
Energy Comp Crossed 7 - 30
Energy Compensation Maximum Energy Reached
7 - 52
Energy Not Reached 7 - 25
Energy Value for Amplitude Step not Reached 7 -
16
Eng S/R Limit Cross 7 - 31
External signal for Amplitude Step did not occur 7 -
15
F
F S/R Limit Cross 7 - 43
Failure of Preset Data or Battery Backed RAM 7 -
18
For optimum performance recalibrate your Actuator
7 - 52
Force A > Pressure 7 - 31
Force B> Pressure 7 - 31
Force Step Conflict 7 - 32, 7 - 33, 7 - 34
Force/Lmt Conflict 7 - 31, 7 - 32
G
Ground Detect Abort 7 - 15, 7 - 21
H
Hold Force > Pressure 7 - 34
Horn Return Timeout 7 - 17
I
Invalid Preset Error Code = 1 7 - 38
Invalid Preset Error Code = 2 7 - 38
Invalid Preset Error Code = 3 7 - 39
Invalid Preset Error Code = 4 7 - 39
Invalid Preset Error Code = 5 7 - 39
Invalid Preset Error Code = 6 7 - 39
Invalid Preset Error Code = 7 7 - 39