2-28
Confidential
Jam C Inside
Open the Top Cover and
release the green levers.
Follow step C to remove
jammed paper. (then Press
Go)
After the print starting sensor was at
the paper feeding state, switchback
sensor does not turn to paper feeding
state.
7003
7004
2-76
Jam D Duplex
Remove the Duplex Tray
from the back of the
machine and check for
jammed paper.
After printing one-side, even after a
certain period of time has passed, the
paper feed sensor does not turn to
the paper feeding state.
7702
7704
7705
2-84
2-85
Jam E Rear
Open the Back Cover and
Paper Chute and remove
jammed paper from the
back of the machine.
While the back over is close state,
after the print starting sensor was
shifted to paper-less state, the switch-
back sensor remains at the paper
feeding state.
7102
7103
7104
7106
2-77
2-78
Jam F OP Tray
Open the Back Cover of
optional Output Tray and
remove jammed paper from
the back of the machine.
When ejecting paper from optional
output tray, after the switchback sen-
sor was at paper feeding state, the
optional output sensor does not turn
to the paper feeding state.
7801
7802
2-86
Jam MP Tray
Remove the jammed paper
from the Multi Purpose
Tray and press Go.
When performing MP printing, while
MP paper empty sensor is at with
paper state, registration front sensor
does not change to paper feeding
state.
7201 2-79
Limit Exceeded
Function Locked
During printing, it reached the
maximum number of print pages.
--- 4.4.1
Log Access Error.
Server Timeout, contact
your administrator.
Time out access request for server
due to such reason as wrong server
address/network unconnected/server
is not activated.
0C01 2-36
Log Access Error.
Authentication Error,
contact your administrator.
Time out access request for server
due to such reason as wrong user
name/wrong password/inconsistency
in the date of the machine and server.
0C02 2-36
Log Access Error.
File Access Error, contact
your administrator.
Time out access request for server
due to such reason as wring directory
name/no write authority for directory/
write lock on file.
0C03 2-36
Log Access Error.
Wrong Date&Time, contact
your administrator.
Time out access request for user due
to such reason as machine watch
(RTC) has not been set and time has
not been obtained at SNTP.
0C04 2-36
Error message Problem
Error
codes
Refer to:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
