CASTLE EP User Manual

© AGRGS 2016 | Data subject to change without notice
67385867493098462 | en, eu, V5, 07. Oct 2016, page 168
15. Appendix 3. The controller numeric configuration
parameters
Parameter
Parameter description
Default
value, ms
D0001
Server-to-controller ping timeout, for the controller to consider
that connection is lost and to switch completely to the
autonomous mode.
10 000
D0002 *
Sensor triggering time, i.e. how long it should be in the new state,
so that the change of state would be accepted by the controller.
200
D0003
Pulse duration of the lock control.
300
D0004
Open door max time, after which the controller is initiating the
respective reader indication.
30 000
D0005
Door wait-to-open max time, after which the controller locks the
lock.
5000
D0006 *
Fire alarm response time, i.e. how long the fire alarm state should
be active, so that the controller would switch to the emergency
fire unlock mode.
1000
D0007
Pulse duration of the control via «M» and «S» lines of the third-
party gate controller.
500
D0008
Guaranteed pause time immediately after starting the controller in
Gate configuration.
500
D0009 *
Guaranteed delay after sending a pulse via «M» line to the third-
party gate controller.
3000
D0010 *
Guaranteed delay after sending a pulse via «S» line to the third-
party gate controller.
1000
D0011
Max time of full length travel of the gate wings, when using a
third-party gate controller.
60 000
D0012
Time of full length travel of the gate wings, when using a direct
drive control (with no limit switches).
20 000
D0013
Delay between starting the first and the second gate wing drives,
when using a direct motor control.
1 000
D0014 *
Guaranteed delay between stopping and restarting motors.
1000

CASTLE EP Specifications

General

Brand	CASTLE
Model	EP
Category	Controller
Language	English