© AGRGS 2016 | Data subject to change without notice
67385867493098462 | en, eu, V5, 07. Oct 2016, page 81
OMA turnstile specific workaround, and click OK). Set Max waiting time before autolocking an
unlocked turnstile option according to the turnstile control unit settings (usually 15 seconds).
Table 47
. Settings of CONF1 dip-unit toggles for operating with GlasStile turnstiles
Because o non-shut-off passage timer and a non-standard control
panel design), there are certain restrictions on its operation as part of ACS:
● The control panel connection is performed only to the turnstile control unit directly. All
the passages authorized from the control panel will be recorded in the ACS as the break-
ins.
● No constant turnstile unlock mode from the ACS client.
● Some issues are likely to arise, when a passage by a card and pressing control panel
buttons occur simultaneously.
Pic 75
. Connecting GlasStile turnstile
Hereinafter, please note that several sections along with the respective tables and figures have
been excluded from the original manual due to lack of some local (Russian) equipment models in
the international market. However, the original ordinals have been kept, thus causing breaks in
numbering of tables and figures.
See footnote 1.
To Next Page
Loading...
