Total TLVs discarded: 0
Total TLVs unrecognized: 0
The following example shows how to clear the LLDP table. The output of the show lldp neighbors command
shows that all information has been deleted from the table.
RP/0/RSP0/CPU0:router# clear lldp table
RP/0/RSP0/CPU0:router# show lldp neighbors
Capability codes:
(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other
Device ID Local Intf Hold-time Capability Port ID
Related Commands
DescriptionCommand
Displays information about LLDP neighbors.show lldp neighbors, on page 118
Displays statistics for LLDP traffic.show lldp traffic, on page 121
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
80
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
clear lldp
To Next Page
Loading...
Need help?
General
