Examples
The following example shows how to set encapsulation on PVC data-link connection identifier (DLCI) 16
for Packet-over-SONET/SDH (POS) subinterface 0/4/0/1.1:
RP/0/RSP0/CPU0:router(config)# interface POS 0/4/0/1.1 l2transport
RP/0/RSP0/CPU0:router(config-subif)# pvc 16
RP/0/RSP0/CPU0:router(config-fr-vc)# encap ietf
Related Commands
DescriptionCommand
Enables Frame Relay encapsulation.encapsulation frame-relay, on page 429
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
428
Frame Relay Commands on the Cisco ASR 9000 Series Router
encap (PVC)
To Next Page
Loading...
Need help?
General
