show ethernet cfm configuration-errors
To display information about errors that are preventing configured CFM operations from becoming active,
as well as any warnings that have occurred, use the show ethernet cfm configuration-errors command in
EXEC mode.
show ethernet cfm configuration-errors [domain domain-name] [interface type interface-path-id]
Syntax Description
(Optional) Displays information about the specified CFM domain name.
domain domain-name
(Optional) Displays information about the specified interface type. For more
information, use the question mark (?) online help function.
interface type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
Command Default
All CFM configuration errors on all domains are displayed.
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
322
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet cfm configuration-errors
To Next Page
Loading...
Need help?
General
