Examples
The following example shows how to configure the router to send SNMP trap notifications for a Frame Relay
PVC:
RP/0/RSP0/CPU0:router(config)# snmp-server host 12.26.25.61 traps public udp-port 5000
RP/0/RSP0/CPU0:router(config)# snmp-server community public RW
RP/0/RSP0/CPU0:router(config)# snmp-server traps frame-relay pvc interval 50
Related Commands
DescriptionCommand
Configures the community access string to permit
access to the SNMP.
snmp-server community
Specifies the recipient of an SNMP notification
operation.
snmp-server host
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
492
Frame Relay Commands on the Cisco ASR 9000 Series Router
snmp-server traps frame-relay pvc
To Next Page
Loading...
Need help?
General
