Task ID
OperationsTask ID
read, writefr
Examples
The following example shows how to set a multilink frame relay interface to bandwidth Class C with a
threshold of 3:
RP/0/RSP0/CPU0:router(config)# interface Multilink 0/3/1/0/100
RP/0/RSP0/CPU0:router(config-if)# frame-relay multilink bandwidth-class c 3
Related Commands
DescriptionCommand
Displays Frame Relay information for the LMI.show frame-relay lmi-info, on page 465
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
451
Frame Relay Commands on the Cisco ASR 9000 Series Router
frame-relay multilink bandwidth-class
To Next Page
Loading...
Need help?
General
