DescriptionCommand
Displays information about errors that are preventing
configured cfm operations from becoming active, as
well as any warnings that have occurred.
show ethernet cfm configuration-errors, on page 322
Displays all the maintenance points that have been
created.
show ethernet cfm local maintenance-points, on page
330
Displays information about local MEPs.show ethernet cfm local meps, on page 333
Displays other MEPs detected by a local MEP.show ethernet cfm peer meps, on page 339
Configures a cross-connect group.xconnect group
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
317
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
service
To Next Page
Loading...
Need help?
General
