clear ethernet lmi interfaces
To clear Ethernet LMI statistics on one or all interfaces, use the clear ethernet lmi interfaces command in
EXEC configuration mode.
clear ethernet lmi interfaces {type interface-path-id | all}
Syntax Description
Interface type. For more information, use the question mark (?) online help function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?) online
help function.
interface-path-id
Specifies clearing of LMI statistics for all Ethernet interfaces running the E-LMI
protocol.
all
Command Default
None
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
executeethernet-services
Examples
The following example shows how to clear E-LMI statistics for Gigabit Ethernet interface 0/0/0/0:
RP/0/RSP0/CPU0:router# clear ethernet lmi interfaces GigabitEthernet 0/0/0/0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
175
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
clear ethernet lmi interfaces
To Next Page
Loading...
Need help?
General
