show controllers backplane ethernet clients
To display information about local client applications, use the show controllers backplane ethernet clients
command in EXEC mode.
show controllers backplane ethernet clients {client-id statistics| all}
Syntax Description
Displays a list of client statistics for the specified client ID. Range is from
1 to 22.
client-id statistics
Displays a list of all client applications and their IDs.all
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Examples
The following example shows the output from the show controllers backplane ethernet clients command,
which displays a list of client statistics for client ID 1:
RP/0/RSP0/CPU0:router# show controllers backplane ethernet clients 1 statistics
Client QNET, ES Client Id 1, PID 20498 running on FastEthernet0_33_1
490915 packets input, 41918238 bytes
490912 packets delivered,41918120 bytes
0 packets discarded (0 bytes) in garbage collection
0 (0 bytes) unicast packets filtered
0 (0 bytes) multicast packets filtered
0 (0 bytes) buffer mgmt policy discards
555660 packets output, 134265364 bytes, 0 could not be transmitted
Table 30: show controllers backplane ethernet clients Field Descriptions
DescriptionField
Client application name and ID, followed by
backplane client application statistics.
Client
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
536
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
show controllers backplane ethernet clients
To Next Page
Loading...
Need help?
General
